Indoor
provincial-flag-set
Provincial Flag Set — All Provinces
Indoor
SETGRFPV
The provincial flag sets cover all ten provinces and the three territories, available in two versions: grommet head (SETGRFPV) for standard flagpole clips and snap hooks, and rope and toggle (SETRTFPV) for external halyard poles with a cleat. Both versions are 36x72 inches — the right size for a commercial pole or an indoor presentation set.
All provinces and territories
Grommet and rope/toggle versions
36x72 inch standard size
Indoor and outdoor use
13
Provinces and territories
36x72
Flag size
2
Attachment styles
Grommet
And rope/toggle
The provincial flag sets cover all ten provinces and the three territories, available in two versions: grommet head (SETGRFPV) for standard flagpole clips and snap hooks, and rope and toggle (SETRTFPV) for external halyard poles with a cleat. Both versions are 36x72 inches — the right size for a commercial pole or an indoor presentation set.
These are the natural companion to any indoor display purchase. A Confederation base with a Canadian flag and the appropriate provincial flag beside it is the standard setup for a government office or municipal chamber. The flag sets are also the right choice for any outdoor commercial installation where flying provincial colours alongside the national flag is a site requirement.
If you are outfitting a municipal building, an arena, or a venue that flies multiple provincial flags, we can quote a full set. Available individually or as complete provincial collections.
Ideal for:
Government offices, municipal buildings, arenas, convention centres, schools, Legion halls, and any site required to fly provincial alongside national flags.
Foundation Requirements
Foundation Diameter:
N/A
Foundation Depth:
N/A
Concrete Spec:
Anchor Bolts:
N/A
N/A
The minimum depth assumes compacted soil. The Building Code typically requires footings below the frost line — generally a minimum of 4 feet (48") below finished grade. Consult your local municipality if in doubt. The anchor cage shipped with the pole is designed for a 4'–6' minimum depth.
Installation Overview
Engineering drawings and full installation instructions ship with the pole. This is a summary for planning purposes.
01
Dig and Pour
Auger or excavate a 26" diameter hole to 44" minimum depth. Bed in gravel, set anchor cage, pour 3,000 PSI concrete. Allow 7 days full cure (or 1 day with quick-set).
03
Walk the pole up
Assemble pole horizontal. Attach hinge pin to base. Two or three people walk the pole up to vertical from the hinge side. Secure the two non-hinge bolts.
02
Level the base
Once cured, thread leveling nuts onto anchor bolts. Place the hinge base plate over the cage, shim level in both directions, and secure with washers and large nuts.
04
Rig and Install
Verify halyard through cam cleat, attach counterweight and snaps, thread the ball finial, install flash collar. Apply silicone bead at collar top. Raise your flag.