Accessories
poleled-flagpole-light
PoleLED Flagpole Light
Accessories
POLELED01
The PoleLED is the right way to light a flagpole. Where a ground spotlight illuminates from below and casts uneven light that changes as the flag moves, the PoleLED mounts on the pole itself and surrounds the flag with a circular ring of CREE LEDs. Because the light source is fixed to the shaft, the flag is fully and evenly illuminated from every angle regardless of which direction it is flying.
Circular CREE LED ring
Fits aluminum and fiberglass
24V weatherproof housing
Illuminates from all angles
24V
Power supply
CREE
LED technology
360
Degree illumination
8.5-20
Mounting height ft
The PoleLED is the right way to light a flagpole. Where a ground spotlight illuminates from below and casts uneven light that changes as the flag moves, the PoleLED mounts on the pole itself and surrounds the flag with a circular ring of CREE LEDs. Because the light source is fixed to the shaft, the flag is fully and evenly illuminated from every angle regardless of which direction it is flying.
The unit is aluminum-housed and weatherproof. It works on both aluminum and fiberglass poles, and on both conical and cylindrical shafts — it can be retrofitted to almost any existing commercial flagpole. The 24V supply and terminal connectors are included, with two wiring options to suit different installation setups.
Mounting height matters for proper illumination. The PoleLED should be mounted at roughly one third of the pole height to ensure the flag is lit across its full area. For a 20-foot pole that is 8.5 feet. For a 30-foot pole, 13 feet. For a 40-foot pole, 20 feet. The mounting height chart below covers all standard commercial pole heights.
Ideal for:
Any commercial flagpole installation where the flag flies after dark — government buildings, car dealerships, arenas, hotels, and any site with a 24-hour flag-flying requirement.
Foundation Requirements
Foundation Diameter:
N/A
Foundation Depth:
N/A
Concrete Spec:
Anchor Bolts:
N/A
N/A
The minimum depth assumes compacted soil. The Building Code typically requires footings below the frost line — generally a minimum of 4 feet (48") below finished grade. Consult your local municipality if in doubt. The anchor cage shipped with the pole is designed for a 4'–6' minimum depth.
Installation Overview
Engineering drawings and full installation instructions ship with the pole. This is a summary for planning purposes.
01
Dig and Pour
Auger or excavate a 26" diameter hole to 44" minimum depth. Bed in gravel, set anchor cage, pour 3,000 PSI concrete. Allow 7 days full cure (or 1 day with quick-set).
03
Walk the pole up
Assemble pole horizontal. Attach hinge pin to base. Two or three people walk the pole up to vertical from the hinge side. Secure the two non-hinge bolts.
02
Level the base
Once cured, thread leveling nuts onto anchor bolts. Place the hinge base plate over the cage, shim level in both directions, and secure with washers and large nuts.
04
Rig and Install
Verify halyard through cam cleat, attach counterweight and snaps, thread the ball finial, install flash collar. Apply silicone bead at collar top. Raise your flag.