Residential
indoor-flagpole-staff-black-wood
Indoor Flagpole Staff — Black Wood
Residential
FPW014WO
Staffs are for flags that are not going outside. The 30, 36, and 48-inch black wood staffs are the standard for indoor display, parade carry, and podium or desk presentation. They are what you see flanking a stage at a municipal event, carried in a colour guard, or mounted behind a desk in a government office.
Three lengths available
Black wood finish
Indoor and parade use
3
Lengths available
Black
Wood finish
30-48
Inch range
Indoor
Use type
Staffs are for flags that are not going outside. The 30, 36, and 48-inch black wood staffs are the standard for indoor display, parade carry, and podium or desk presentation. They are what you see flanking a stage at a municipal event, carried in a colour guard, or mounted behind a desk in a government office.
The three lengths cover the main use cases: 30-inch (FPW014MO) for desk and tabletop display, 36-inch (FPW014WP) for podium and wall bracket use, and 48-inch (FPW014WO) for floor standing and parade carry. All three are black wood finish with standard hardware for attaching a flag with grommets or a sleeve.
These staffs pair naturally with presentation flag sets and Confederation bases. If you are furnishing a boardroom, a municipal chamber, or a ceremony, a matching staff and base gives the display the weight it deserves.
Ideal for:
Municipal chambers, boardrooms, schools, Legion halls, colour guards, cadet corps, ceremonial events, and any indoor setting where a flag needs to be properly displayed.
Foundation Requirements
Foundation Diameter:
N/A
Foundation Depth:
N/A
Concrete Spec:
Anchor Bolts:
N/A
N/A
The minimum depth assumes compacted soil. The Building Code typically requires footings below the frost line — generally a minimum of 4 feet (48") below finished grade. Consult your local municipality if in doubt. The anchor cage shipped with the pole is designed for a 4'–6' minimum depth.
Installation Overview
Engineering drawings and full installation instructions ship with the pole. This is a summary for planning purposes.
01
Dig and Pour
Auger or excavate a 26" diameter hole to 44" minimum depth. Bed in gravel, set anchor cage, pour 3,000 PSI concrete. Allow 7 days full cure (or 1 day with quick-set).
03
Walk the pole up
Assemble pole horizontal. Attach hinge pin to base. Two or three people walk the pole up to vertical from the hinge side. Secure the two non-hinge bolts.
02
Level the base
Once cured, thread leveling nuts onto anchor bolts. Place the hinge base plate over the cage, shim level in both directions, and secure with washers and large nuts.
04
Rig and Install
Verify halyard through cam cleat, attach counterweight and snaps, thread the ball finial, install flash collar. Apply silicone bead at collar top. Raise your flag.