Fiberglass
25-foot-fiberglass-flagpole
25-Foot Fiberglass Flagpole with Internal Halyard
Fiberglass
FPF025IH
The 25-foot fiberglass delivers serious commercial presence without any of the maintenance overhead of aluminum. The bright white gelcoat finish is part of the fiberglass structure itself — it cannot oxidize, peel, or require repainting, no matter how many years of weather it faces.
190 mph wind rated
Non-conductive — no grounding needed
Tilt base included
Maintenance-free gelcoat finish
25'
Above ground
4.7"
Butt diameter
190
MPH wind rated
3x6
Recommended flag
The 25-foot fiberglass delivers serious commercial presence without any of the maintenance overhead of aluminum. The bright white gelcoat finish is part of the fiberglass structure itself — it cannot oxidize, peel, or require repainting, no matter how many years of weather it faces.
At 190 mph unflagged, this pole is built for exposure. Whether it is a beachfront resort, a marina, a northern property dealing with ice and freeze-thaw, or simply a buyer who never wants to think about the pole again, the fiberglass delivers a long-term solution.
Non-conductive by nature, fiberglass poles will not attract lightning and do not require a copper grounding rod at the base. Combined with the tilt base for easy solo maintenance, this is one of the most practical commercial poles in the lineup for sites that are hard to service.
Ideal for:
Coastal and waterfront properties, northern sites with extreme weather, marinas, resorts, and any buyer prioritizing long-term durability and zero-maintenance finish.
Foundation Requirements
Foundation Diameter:
30 inches
Foundation Depth:
36 inches minimum below grade
Concrete Spec:
Anchor Bolts:
300 kg minimum
M16 threaded anchor rods (included)
The minimum depth assumes compacted soil. The Building Code typically requires footings below the frost line — generally a minimum of 4 feet (48") below finished grade. Consult your local municipality if in doubt. The anchor cage shipped with the pole is designed for a 4'–6' minimum depth.
Installation Overview
Engineering drawings and full installation instructions ship with the pole. This is a summary for planning purposes.
01
Dig and Pour
Auger or excavate a 26" diameter hole to 44" minimum depth. Bed in gravel, set anchor cage, pour 3,000 PSI concrete. Allow 7 days full cure (or 1 day with quick-set).
03
Walk the pole up
Assemble pole horizontal. Attach hinge pin to base. Two or three people walk the pole up to vertical from the hinge side. Secure the two non-hinge bolts.
02
Level the base
Once cured, thread leveling nuts onto anchor bolts. Place the hinge base plate over the cage, shim level in both directions, and secure with washers and large nuts.
04
Rig and Install
Verify halyard through cam cleat, attach counterweight and snaps, thread the ball finial, install flash collar. Apply silicone bead at collar top. Raise your flag.